Teak

[Emily Rose]

Anybody know where I can get a 26 x 14 piece of teak?

I'm looking to redo the dash on my kids 1975 BW Montauk and instead of redoing the fiberglass I thought I've cover it in wood to match the rest of the boat.

Thanks.

[slvrlng]

Try these guys out. I don't know how wide you can get teak but you could biscuit it into whatever width you need.

http://www.marine-plywood.us/

[crash1371]

I seen some on ebay http://cgi.ebay.com/EXOTIC-WOOD-LUMBER-TEA...id=p3286.c0.m14

[fishie1]

Not to be a smartass but it will be easier to find a 52 x 7 piece, cut in half, run through jointer and edge glue.

Cheaper too. The plywood may work for you depending on how you choose to treat the edges.

[DDHand]

Anybody know where I can get a 26 x 14 piece of teak?

I'm looking to redo the dash on my kids 1975 BW Montauk and instead of redoing the fiberglass I thought I've cover it in wood to match the rest of the boat.

Thanks.

Probably any good wood working or cabinet shop can make one, that size will probably be two ro more boards glued / epoxied together. Also I think the BW's were mahogany instead of teak.

If you cant find one i know a shop here in Charleston, SC taht will make it for you. will need to know thickness as well.

Good luck!

[bly]

I am 100% sure that the original BW wood was mahogany. Mahogany is cheaper and easier to find. Joining as said previous is the best way to go wide.