Mast Head Light

[ExBailBonds]

That was my bad, I didn't at first read, see the part about being in the bandwidth. However, if one does a little geometry, there is a window where pucks can be mounted flush, yet still meet both guidelines of being no closer than 1 meter to the radome, as well as not being within the beamwidth, which would be 12.5deg below the centerline of the radome.

Jimmy, it's good to see you. Welcome aboard.

That was my problem the geometry did not go in my favor i had to go above the beam.

Its all good

[kingair]

Thank you for this discussion. I appreciate all of the advice.

[Chisox]

King,

As long as your happy with your mount...antennas and otherwise!

Ex,

[Overcurrent]

Nice job there, King. I have toyed in the past with a similar idea for a masthead light/GPS/short VHF mount on a regular SS ratchet mount to replace the masthead light on O2.

[welder]

FYI, your Anchor light is supposed to be ONE meter above everything .

I like where Kings is , rock and roll.

[kingair]

That was my bad, I didn't at first read, see the part about being in the bandwidth. However, if one does a little geometry, there is a window where pucks can be mounted flush, yet still meet both guidelines of being no closer than 1 meter to the radome, as well as not being within the beamwidth, which would be 12.5deg below the centerline of the radome.

Jimmy, it's good to see you. Welcome aboard.

I am switching to an 8 inch light, same type.