csvencer

Stainless Steel 15 1/4 x 15 - $150 I can ship from 23435. http://norfolk.craigslist.org/boa/1756031699.html -Svence

Thanks. Just trying to get this out and fund some new gear. Also, if I have received payment (usually paypal) by noon, I can have items shipped via UPS that afternoon. I know I hate waiting around for stuff so you shouldn't have to either! -Svence

All excellent condition, lightly used for less than a season, replaced with all new Yamaha rigging and then switched over to Johnson. Pics are on the Craigslist link, all in zip code 23435. http://norfolk.craigslist.org/boa/1748086116.html Yamaha 703 Controls - $150 Gauge Harness - 6y5-83553-20 - Harness for hooking up the controls to the digital tach. - $15 Oil Tank Harness , not sure on length, reaches from under passenger seat all the way to engine - $30 Yamaha Trim/Oil Harness, runs from outboard to digital tach/trim gauge - $50 17' Control Cables - 2 -Really smooth, nice and clean connections -$30 for the pair Battery cables, reach to the bilge - $15 Digital Tach, Trim, Oil, Alarms, Hr meter - $200 Also have an oil tank, think it is the 2.5 Gallon one - local only on that please - $75 (didn't grab any pics, sorry, email if interested) Thanks. -Svence

It only takes one. Nice shot! -Svence

I don't have any first hand knowledge of them but you might have a better shot over at the wellcraftv20.com page as there are a couple people on there who have moved up to them. From all the stuff I have seen on them they sound like pretty good hulls but just like any other 30 year old boat you need to take a look at the deck, transom, stringers, etc. The sweet thing about them is there isn't another 25 footer out there that can sleep 4 like the wellcrafts can. -Svence

Nice looking rig! Congrats. -Svence

I will pull it off this afternoon. What should it be reading? I am assuming it will vary as the sensor moves. I just saw one sell on ebay for $30, which is a lot nicer than the $90 yamaha wants, hopefully I can grab a new one if this doesn't work out. BC- I got it moving but still nothing on the gauge. Thanks for the help. -Svence

Hotspot- I finally got around to replacing the collar on the tilt tube with the new stainless one but still can't get the trim gauge to work. The sender was stuck so I worked on that for a bit until it was loosened up, but still nothing. Is there anyway to tell if it is broken without just replacing it? -Svence

440S or 540S, which ever is in your price range. The new garmins are easy to use, powerful and expandable. My favorite thing is the new fuel management capabilities they have. The GFS10 is worth its weight in gold, especially as gas prices climb. -Svence

$55 Shipped. -Svence

I am in Northern Suffolk, out of Bennett's Creek area. Usually spend the summer at Factory Point with the grill and a cold beer. -Svence

Bought this to replace the teak one I have onboard but ended up redoing the teak because this wasn't going to fit without some modifications, so I don't need this. Its brand new, never installed and even has the keys. $65 shipped, if no one wants it I will throw it on CL or ebay. Ebay username is csvencer if anyone wants to check my feedback... Measurements are on this page about half way down... http://www.ssicustomplastics.com/everything.htm -Svence

Any ideas on what happened? Swamped? Boat plug? -Svence

Thanks. -Svence

If you don't mind, how did you get them and how much did they set you back? I have the standard led light ups but those are sweet. -Svence

King, Not sure if you have seen this page before but with all your deutsch connectors I thought you might find them handy. http://www.ezacdc.com/Scripts/default.asp I looked at them when I did some rewiring but it wasn't practical because I had already replaced half of my gear without the connectors. -Svence

Thanks. Too bad I have to pull the motor to redo it (cable steering won't slide while hung). Next time I guess. -Svence

I like that setup with the fuel line outside so you can prime but then merging with the rest of the rigging. Where did you find that? I just redid mine and used a expandable mesh (sort of like a finger trap) that I can squeeze the primer bulb through. It's not perfect but works. -Svence

Nice, I thought I was the only one who listened to him. He's got some good jams. And I second "all summer long" everytime I hear it I wish I was on the boat having a beer. Another great buffet song is "still in paradise" off of his live in anguilla album, which is a great 2 CD set in itself. http://www.amazon.com/Still-Paradise-Banki...x/dp/B000XH7FIK -Svence

Thanks. I will take a look at them this week. Hopefully it is just a stuck sensor and not a broken one. -Svence

Hotspot - I have the same issue, no change in the gauge when I trim up or down. Could you post a shot of what I am looking at on a 150 2 Stroke (2002)? I am hoping it is just a stuck sensor but haven't figured out what parts I should jiggle/lube yet. Thanks. -Svence

Man I wish you had a two stroke. Those tutorials are awesome, just not all apply. It is interesting to see how much more is under the hood for you 4 stroke guys. That thermostat change looks a lot trickier than doing a 2 stroke. -Svence

Added it to the Wellcraft site I visit. -Svence

And its gone. Great powerbuy Wiley, I don't need one now but have forwarded it on to some that may. -Svence

Depending on the size of your ebox and quality (thickness) of the fiberglass they can help reproduce some nice bass. Only problem is when its open you lose it. -Svence