monstermash

wondering if any other hydrocat owners around here that i could compare notes with, being as they are out of buisness and all. our rig is a 30cc w/ f225s hauled the boat out the other day to do various maintenence etc. and ran into something i can't figure out. There is a sintered bronze disc (or something else i know its not zinc), about 2in diameter on transom beneath the water line. There is one on each sponson. inside the bilge there is a ring connector attached to this plate via a nut. Ring connector is going to what looks like 10 gauge wire and begins a run forward toward to bow. can't find anything that is hooking into this wire (at least that i can find). boat has an old sitex loran xj-1 but even this unit doesn't seem to attach to this wire run (figured that might have been it for interference reduction). Anyone have any ideas? maybe a bonding system, but seems way to small for that. Need to figure it out because i broke one of the little disk while trying to clean it up and now i can't find a replacement.

Figured I would introduce myself on this forum and give a little info on myself. Where do you fish out of ? Do the majority of my fishing out of Mexico Beach FL, lived there for a few years and have family/future family in the area. I also make it down to Wakulla and St. Marks on occasion. What do you like to fish for ? At MB, pretty much anything that is out there at the time. Definately target cobes, kingfish, wahoo, dolphin. Not much of a bottom fisherman. Trout and reds around Wakulla/St. Marks. What about your boat and Tackle ? Our boat in MB is a 2001 30' HydroCat CC w/F225's for offshore, 17' Cape Horn w/F115 for short jaunts and St. Joe Bay.

Figured I would pay homage to what is likely my new time sink ... Never spoke up much on the "darkside" but been there since '05, excited. Fish out of Mexico Beach, FL