ken2 -will any of the merc props fit a 2010 etec 150ho

[nate.]

will any of the merc props fit a 2010 etec 150ho?

[ken2]

will any of the merc props fit a 2010 etec 150ho?

Yes, they all will.

Did you put a 150 on that Mitzi ??

[nate.]

will any of the merc props fit a 2010 etec 150ho?

Yes, they all will.

Did you put a 150 on that Mitzi ??

lol. no. i bought a new ecc vantage. she's still in a bucket of resin and a roll of fiberglass. should be here in 3-5 weeks. i have a 20 and a 22 pitch raker. that model boat has been ran on several different props and the raker was found to be the best. from what i understand, the boat DOES NOT like stern lifting 4 blades as they make the bow wanna dig and the boat wont air out up on the pad (it has sponsons too). im gonna have rich work the 22. he says he can make it spin the same rpm's as a 20. if im unhappy with the results ill run more props. so far, best results on that hull was 58 with a stock 20 raker at 5600 rpm's or so. my goal is 60+ with a good hole shot.

[ken2]

Well, let me know how she runs.

I may have something different to try just to see what happens.

[nate.]

ok. wont be long bro. boat gets infused friday.