straycatboat

Complete new Stainless steel frame for 2650 Glacier Bay cat. New includes s/s rod holders. Top not included\$1000.00

saints 7 colts23

saints 28 colts 21

2- Power Tech props 15 1/4" X 24 " pitch, 4 blade Stainless ( Right hand turn and Left hand turn ) hubed for Suzuki 150HP thru 300 hp, Can be rehubed by Power Tech for $50 each to fit any engine. Used 2 times (too much pitch for my boat). Excellent condition, includes prop hardware. New cost $900 Take them for $550.00----or --- Will trade for Suzuki 16" x 20 pitch props Rick 772-388-8782

That sounds like what I got to do , remove the thru hull transducers from insides the sponsons, plug the hole and reinstall them on the outsides.. Nightmare job, trying to remove all the 4200 I used to install them. I really apreciate the assistance. Do you know anyone that owns a 29 I can bounce some questions off of like fuel mileage prop selection, and addding some hatches in the front deck. Rick

My friend installed one on his motorhome and towed vehicle ., eliminated tons of 24 volt to 12 volt wiring lighting nightmare problems. They are magnetic and stic to the jeep real good. Just don't foret to put them in a safe place when done or some ding dong might steal them

I have a few questions on the 2008 twin vee 29 I just purchased. You know the factory is closed , so no help there. My boat runs 42mph loaded to fish at 5200 rpms, running 24" power tech 4 blade props. What performance do you get and what props are you running> What is your fuel mileage and rpms at the sweet spot (mPH) Another problem: I Have a furuno fcv 585 with ss 264 tilted 20 degree element transducers installed on the insides hulls of the sponsons and read bottom good up to 15 mph, after that the screen goes nuts. Any suggestions, what transducers are you running , how do they work? Rick 772-388-8782

I have a few questions on the 2008 twin vee 29 I just purchased. Hopfully someone out there has a similar boat and can help. You know the factory is closed , so no help there. My boat runs 42mph loaded to fish at 5200 rpms, running 24" power tech 4 blade props. What performance do you get and what props are you running> What is your fuel mileage an d rpms at the sweet spot (mPH) I Have a furuno fcv 585 with ss 264 tilted 20 degree element transducers installed on the insides hulls of the sponsons and read bottom good up to 15 mph, after that the screen goes nuts. Any suggestions, what transducers are you running , how do they work? Rick 772-388-8782 __________________