loose_cannon

It's a friend's boat (also named Jim). Not sure who exactly owned it first, but he was a local. They kept it in a hanger up at Ormond.

1991 Mako 261, Twin 2000 Yamaha 200 HP OX66 Outboards (both motors up to date on maintenance 11/13/09), Trim Tabs, Hydraulic Steering, Furuno FCV582L Fathometer, Furuno GP35 DGPS, New Icom VHF, Marine CD/AM/FM, Lees 18.5' Outriggers, Pompanette Fighting Chair, Cannon Electric Downrigger, Freshwater Washdown, In Deck Livewell, Four SCUBA Tank Holders and Full Canvas Custom Boat Cover. Also Included is a heavy duty (six lug) tandem axle trailer with Kodiak disc brakes and a spare tire. This is an excellent fishing boat in great condition that has always been dry stored and covered. She is located in Ponce Inlet - East Central Florida. $27,500 Call Jim 386-295-1133

Exactly. Octane is a measure of volatility. Higher octane = lower volatility.

"Promises made in a storm are forgotten in calm water".

Thank you, I built the pulpit out of cypress and put multiple coats of Sikkens Cetol on it. As a bottom fisherman and diver, I do a LOT of anchoring. Having a good pulpit and fairlead really makes it easier on the AB (anchor beetch).

Same exact principle except it costs a minimum of $59.95 for the mechanism, plus $9.95 for every extra shear pin. I don't like the fact that it uses a specialized shear pin. Sure enough you wouldn't have one or couldn't find it when you needed it. Two screw pin shackles and some zip ties/80# mono/stainless wire for the same result. Use the extra $50 for gas or tackle.

1. Drill a 1/2" hole in the crown of the anchor. 2. Attach a screw pin shackle 3. Attach the chain to the screw pin shackle at the crown (you may need two shackles) 4. Use three nylon zip ties or three wraps of 80# mono to hold the chain to the eye on the shank of the anchor 5. Leave enough slack in the chain along the shank for the flukes to fully pivot both directions If your anchor becomes fouled, you pull it with the boat (from the bow cleat) and the nylon zip ties or mono will break. Note: I highly recommend the use of an anchor ball for ease of retrieval. The ties are plenty strong enough to keep a boat anchored, but they can't withstand the pull of the engine. The chain then pulls the anchor from the crown and it pops right out of whatever it is hung up on or in. Keep some extra zip ties with you and re-rig it when you get it back on the boat. Bigger boats take more zip ties. You'll never lose another anchor.